Wi-Fi AP Router
The indoor residential GPON ONTs from Polysense are custom designed to deliver a full range of advanced broadband services over an all-optical broadband access network.
The Polysense PxS 8025 GPON ONT supports 1GE port, 3FE ports, and 802.11 b/g/n Wi-Fi. It’s fully compliant with ITU-T G.984 GPON international standard. The ONT has achieved comprehensive interoperability with virtually all leading GPON OLTs in the industry by supporting full OMCI stack. It’s most cost effective, easy and flexible deployment, mature software and advanced feature set, enabling various broadband deployment scenarios such as FTTH and FTTO.
Feature Highlight
ü Support 4094 VLANs
ü Support 2K MAC address table, support MAC address limitation
ü Support port speed limitation, storm control, isolation and loop detection
ü Support dying Gasp
ü Support IGMP Snooping, support CTC controllable multicast
ü Support 8 priority queues scheduling with SP algorithms
ü WAN connection support route mode and bridge mode
ü WAN connection support PPPoE, dynamic IP and static IP configuration at route mode
ü Support OMCI, CLI and WEB configuration management
ü Support remote upgrade with OLT and local upgrade in WEB
Standard Support
ü ITU-T G.984 compliant
ü IEEE 802.3 Ethernet
ü IEEE 802.1p/q VLANs
ü IEEE 802.3u Fast Ethernet
ü IEEE 802.3ab 1000Base-T
Wi-Fi AP: 802.11b/g/n
ü 2.4 GHz band - 2x2 MIMO
ü Internal antennas
ü Channel width: 20 MHz or 40 MHz
ü Max Wi-Fi Rates: 54 Mbps (g); 270 Mbps (n)
Product Specification
|
Hardware Specification |
|
|
Data Interfaces |
Provide 1 GPON optical port |
|
Provide 4 LAN ports (including one 10/100/1000Base-T port and 3* 10/100 Base-T ports) |
|
|
Provide 802.11b /g /n access, 2 built-in antennas |
|
|
Transmission Rate |
Upstream: 1.244Gbps Downstream: 2.488Gbps |
|
LED Indications |
POWER indicates the status of power supply |
|
LAN1-LAN4 indicate LINK status of each LAN interface |
|
|
PON indicates register status of optical interface |
|
|
WLAN indicates data transmission status of WIFI |
|
|
Buttons |
RESET for system reset |
|
Power |
12V/1A DC power supply |
|
Typical power consumption < 12W |
|
|
Weight |
0.2Kg |
|
Enclosure Temperature |
0～55℃ |
|
Dimension |
140mm（Length）*105mm（Width）*33mm（Height） |
|
Software Function |
|
|
PON port |
Compliance with ITU-T G.984.x, and CTC standards |
|
Support 8 priority queues scheduling with SP algorithm |
|
|
Support dying gasp |
|
|
Ethernet ports |
Support MDI/MDIX |
|
Support ingress/egress rate limitation |
|
|
Support isolation |
|
|
WLAN |
Support AP mode |
|
Support 802.11b/g/n |
|
|
Support multiple SSIDs |
|
|
Support WPA/WPA2, WPA-PSK/WPA2-PSK |
|
|
Support ch.1-11 and auto channel |
|
|
VLAN |
|
|
Support 802.1Q VLAN |
|
|
MAC Learning |
Support 2K MAC address |
|
Support MAC limitation |
|
|
Support static MAC address |
|
|
Configurable aging time |
|
|
STP |
Support IEEE 802.1d (STP) |
|
Multicast |
Support IGMP Snooping |
|
Support 255 multicast entry |
|
|
Support IGMP v1/v2 |
|
|
Support CTC controllable Snooping |
|
|
QoS |
Support 802.1p priority queue scheduling |
|
Support SP scheduling algorithms |
|
|
ACL |
Rule according to destination IP, source IP, destination MAC, source MAC, destination protocol port number, source protocol port number, SVLAN, Ethernet type, IP priority, IP packet protocol type |
|
Packet filtering according to above rules |
|
|
Flow Control |
Support IEEE 802.3x duplex flow control |
|
Support port rate limitation |
|
|
Mirroring |
Support port mirroring for LAN interfaces, PON ports and CPU |
|
Maintenance |
Support configuration saving, and restore to factory configuration |
|
Support local upgrading through telnet and web |
|
|
Support remote upgrading from OLT |
|
|
Management |
Support local or remote CLI configuration |
|
Support web configuration |
|
|
Support OMCI management |
|
