English
WxS8800-21E0J4

WxS8800-21E0J4

LoRaWAN NDIR CO2(0-2,000PPM) Gas Smart Sensor & RTU 2-in-1 Terminal
0.00
0.00
  
LoRaWAN NDIR CO2(0-2,000PPM) Gas Smart Sensor & RTU 2-in-1 Terminal


WxS8800-21E0J4


LoRaWAN NDIR CO2 Gas Smart Sensor & RTU 2-in-1 Terminal

Product Highlights

v  LoRaWAN NDIR CO2 Gas Smart Sensor & RTU 2-in-1 Terminal

v  2-in-1 smart sensor(s) and RTU terminal product

v  Optional DC 5V power supply

v  Optional Battery power supply (ER34615H 19,000mAh/ER34615M 13,500mAh)

v  CO2 concentration can be monitored (0-2,000ppm), with high sensitivity, high resolution and fast response time

v  Expandable with additional Polysense PSS sensors

v  Expandable with 2 of 14 types PSS gas sensors with aluminum Sleeve enclosure

v  Up to 8 working simultaneously including sensors and controllers; Customization needed if more than 8 working at the same time

v  RTU controlling signal and interfaces OD/PWR triggered by sensor(s) data or OTA command for solenoid valve or other devices

v  Optional (Public/Private) IoT cloud platform PolySuite iView and LoRaWAN network iServer

v  LoRaWAN Compliance


Products includes following parts:

v  WxS8800 LoRa Smart IoT and RTU 2-in-1 Terminal

v  ENC-102003 WxS Series 4.0 High Poromeric Enclosure(φ145x90x70mm)

v  PSS-21E0J4 NDIR CO2 Gas Sensor (Range: 0-2,000PPM,Resolution: 1PPM)  


Configuration Tool

v  iEdge4.0 WxS IoT Terminal products can be configured with PolySuite software-visual based Configuration Tool or CLI interface command or OTA via IoT platform, such as PolySuite PaaS platform iView.

v  Download link https://ota.polysense.online/wincc/ConfigurationTool.rar


Product Image

v  The shell is WxS Series 4.0 High Poromeric Enclosure(φ145x90x70mm), as shown in the figure below

v  The sensor is externally connected. See the following document PSS-21E0J4 for the sensor picture


WxS8800


LoRaWAN Smart IoT and RTU 2-in-1 Terminal


Related Products

Product .         Interf.                           Descriptions

WxS8800     11MPI+RS485+OD*2+PWR*2    LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx00, PSB-BD01, &  Enclosure)

WxS8801     RS485+OD*2+PWR*2         LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx01, PSB-BD01, & Enclosure)

WxS8802     0-20mA*1+OD*2+PWR*2 LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx02, PSB-BD01, & Enclosure)

WxS8803     0-20mA*4+OD*2+PWR*2 LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx03, PSB-BD01, & Enclosure)

WxS8804     0-3.3V*2+OD*2+PWR*2    LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx04, PSB-BD01, & Enclosure)

WxS8805     0-3.3V*4+OD*2+PWR*2    LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx05, PSB-BD01, & Enclosure)

WxS8806     0-10V*2+OD*2+PWR*2     LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx06, PSB-BD01, & Enclosure)

WxS8807     0-10V*4+OD*2+PWR*2     LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx07, PSB-BD01, & Enclosure)

WxS8808     PT100*1+OD*2+PWR*2    LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx08, PSB-BD01, & Enclosure)

WxS8809     PT100*5+OD*2+PWR*2    LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx09, PSB-BD01, & Enclosure)

WxS880A     Switch*1+OD*2+PWR*2    LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx0A, PSB-BD01, & Enclosure)

WxS880B     Switch*5+OD*2+PWR*2    LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx0B, PSB-BD01, & Enclosure)

WxS880C     Unibus*1+OD*2+PWR*2   LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx0C, PSB-BD01, & Enclosure)

WxS880D     Unibus*18+OD*2+PWR*2 LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx0D, PSB-BD01, & Enclosure)

WxS880E     IIC*1+OD*2+PWR*2            LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx0E, PSB-BD01, & Enclosure)

WxS880F     SPI*1+OD*2+PWR*2           LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx0F, PSB-BD01, & Enclosure)

WxS880G     Uart*2+OD*2+PWR*2        LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx0G, PSB-BD01, & Enclosure)

WxS880H     Uart*3+OD*2+PWR*2        LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx0H, PSB-BD01, & Enclosure)

WxS880J      Uart*1+RS485+OD*2+PWR*2  LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx0J, PSB-BD01, &  Enclosure)

WxS8850     Ai/Ao/Di/Pi/Ro/IIC/SPI/Ci + RS232/485/Ro/RJ45  LoRaWAN Smart RTU


Product Highlights

Interfaces supported:

o    MPI:(AIN(0-20mA)*2, PT100*1, VIN(0-10V/0-3.3V)*2, Switch*1 ,Unibus*1, IIC *1SPI*1, Uart(3.3V TTL)*2), RS485*1

o    RTU interfaces

§  OD*2 output for external devices controlling

§  PWR*2 output for external devices/sensors power supply or customization usage

2-in-1 DC(5V/12V)+Battery(3.6V Li-SOCl2 ER34615H/M) Power Supply, DC in priority

Up to 8 working simultaneously including sensors and controllers; Customization needed if more than 8 working at the same time

Built-in sensor options including:

o    PSS-403011 IIC         Temperature and Humidity Sensor (Indoor)

o    PSS-403012 RS485      Temperature and Humidity Sensor (Indoor)

o    PSS-403013 IIC          Temperature and Humidity Sensor (IP67,Outdoor)

o    PSS-403014 RS485     Temperature and Humidity Sensor (IP67,Outdoor)

o    PSS-403021 IIC         Temperature+Humidity+Barometric Pressure Sensor(Indoor)

o    PSS-403022 RS485     Temperature+Humidity+Barometric Pressure Sensor(Indoor)

o    PSS-403031 IIC         Temperature+Humidity+Barometric Pressure+Light Sensor(Indoor)

o    PSS-403032 RS485     Temperature+Humidity+Barometric Pressure+Light Sensor(Indoor)

o    PSS-423011 Uart        AQI(PM2.5/10, SO2,NO2, O3, CO,Temp,Humidity) PPM Level Sensors

o    PSS-423031 Uart        IAQ(PM2.5/10, CO2, HCHO, Temp,Humidity) Sensors

o    PSS-423041 Uart     IAQ(PM2.5/10, CO2, TVOC, Temp,Humidity) Sensors

o    PSS-423051 Uart        IAQ(PM2.5/10, CO2, HCHO, TVOC,Temp,Humidity)Sensors

o    PSS-318711 Uart       GPS/Beidou Positioning Sensor

o    PSS-318712 RS485   GPS/Beidou Positioning Sensor

o    PSS-319311 0-3.3V  Tilt / Inclination Sensor (SHM- Structure Health Monitoring)

o    PSS-333051 0-3.3V  PIR  Sensor (3-4 Meters)

o    PSS-333052 0-3.3V  PIR  Sensor (up to 20 Meters)

o    PSS-334061 0-3.3V   UV Sensor (Range:0-15 grade, outdoor)

o    PSS-355051 Switch    Uni-Call Button & Controller

o    PSS-362011 Uart       Sound/Noise Sensor (30~130dB range, Indoor)

o    All Gas Sensors with Product No. PSS-21xxxx

Support 1-8 enclosure externally connected sensors

o    All enclosure external PSS sensors w/o separate power supply

RTU OD & PWR(PWM) output control interfaces

o    OD output control interface for controlling external devices such as electric relay,AC contactor, beeper, draught fan, lamps and lantern etc.

o    PWR*2 output, one default for external devices/sensors power supply voltage output, one with 3.3V voltage; or customization usage,such as for PWM port

o    PWR port signal can be used as PWM output to control stepper moter or lamp

o    Sensor(s) data or OTA Command triggered OD/PWR controlling signal & interfaces

Power supply options:

o    PSB-BT01     WxS Terminal Battery Power (3.6VDC Output) (3.6V Li-SOCl2 ER34615H/M)

o    PSB-BT02   WxS Terminal Battery Power Board (3/5/9/12VDC Output) (3.6V Li-SOCl2 ER34615H/M)

o    PSB-DC01    WxS Terminal DC Power Board (Inc. PSP-DC012V)

o    PSB-BD01   WxS Terminal Battery (3.6V Li-SOCl2 ER34615H/M) & DC Power Board(Inc. PSP-DC012V)

o    Battery capacity ER34615H: 19000mAh/ER34615M: 13500mAh

iEdge 4.0 terminal enclosure options

o    ENC-102001 WxS Series 4.0 Enclosure(φ145x90x55mm, IP67)

o    ENC-102002 WxS Series 4.0 Poromeric  Enclosure(φ145x90x59mm)

o    ENC-102003 WxS Series 4.0 High Poromeric Enclosure(φ145x90x70mm)

Terminal and sensor parameters configurable with Configuration Tool running on PC

o    LoRaWAN ISM Global Bands Supported and SW Configurable

o    LORaWAN Uplink Transmission Cycle Configurable

o    Sensor Parameters Configurable

o    Sessor Data Report Cycle Configurable

FOTA (Over The Air) firmware upgrade, including to upgrade loader and application images

OTA (Over The Air) terminal running parameters supported including output signal

Low power consumption, years of battery operational life with 3.6V Li-SOCl2 ER34615H/M Battery with various scenarios

Integrated internal antenna, or optional external SMA/IPEX antenna

The transmission reaches 5km in NLoS (non-line of sight) and 18km in LoS (line of sight) environment

LoRaWAN Compliance


Specifications

Parameters

Value

Smart Terminal

Interfaces 

MPI Interfaces-Any Mixture of Following:

MPI:(AIN(0-20mA) *2, PT100 *1, VIN(0-10V/0-3.3V) *2,   Switch *1 ,Unibus*1, IIC *1SPI*1, Uart(3.3V TTL)*2), RS485*1

Output Control:    OD*2 & PWR*2

Data Report

Cross-threshold report, plus periodic report (the   threshold and the periodic report cycle are both user-configurable)

Intensive data sampling and averaging

Support intensive data   sampling and averaging to improve data accuracy

Wireless

ISM Regional Parameters

AS923 (AS923-1, AS923-2, AS923-3, AS923-4)

AU915

CN470 CN779

EU433

EU868

IN865

KR920

RU864

US915

Maximum Link Budget

168dB

Distance

Up to 5km in NLOS; up to 18km in LOS

Antenna

Integrated internal antenna or external 1/2   wavelength whip antenna (SMA)

Mechanical

Dimension

3 Enclosure options with different size

WxS Series 4.0 Enclosure(φ145x90x55mm, IP67)

WxS Series 4.0 Poromeric  Enclosure(φ145x90x59mm)

WxS Series 4.0 High Poromeric   Enclosure(φ145x90x70mm)

IP rating

IP65 & IP67

Operating Temperature

-40C to +85C

Total Weight

150 g

Electrical

Supply Voltage

3.6VDC

Power Type

Replaceable 1 ER34615H/M 3.6V Li-SOCI2 Battery   (H/M); DC 4.5V – 12V optional

Compliance/Certification

LoRaWAN 1.0.2

     

 

FCC(America): 2AO7W-WXS8000,

IC(Canada): 23701-WXS8000

CE(European Union)B1810246

ROHS(European Union): R2BJ180927F0664E

Configuration Tool

iEdge4.0 WxS IoT Terminal products can be configured with PolySuite software-visual based Configuration Tool or CLI interface command or OTA via IoT platform, such as PolySuite PaaS platform iView.

v  Download link https://ota.polysense.online/wincc/ConfigurationTool.rar

Installation Guide   

Below diagram shows the general installation guide for WxS8800, it can be installed on any flat and solid surface:













Below is the recommendation of the self-tapping screw and its sizes:

Product Images

WxS Series 4.0 Enclosure(φ145x90x55mm, IP67)


WxS Series 4.0 Poromeric  Enclosure(φ145x90x59mm)

WxS Series 4.0 High Poromeric Enclosure(φ145x90x70mm)

PSS-21E0J4


CO2 Gas Sensor

Related Products

Product No.                  Interf.               Descriptions

PSS-21E0J1           Uart                 NDIR CO2 Gas Sensor (Range:400-2,000PPM, Resolution:1PPM)                                            

PSS-21E0J2           Uart                 NDIR CO2 Gas Sensor (Range:400-5,000PPM, Resolution:1PPM)                                      

PSS-21E0J3           Uart                      NDIR CO2 Gas Sensor (Range:400-10,000PPM, Resolution:1PPM)                                   

PSS-21E0J4           Uart                NDIR CO2 Gas Sensor (Range:0-2,000PPM, Resolution:1PPM)                                    

PSS-21E0J5           Uart                 NDIR CO2 Gas Sensor (Range:0-5,000PPM, Resolution:1PPM)                                         

PSS-21E0J6                  Uart                      NDIR CO2 Gas Sensor (Range:0-10,000PPM, Resolution:1PPM)                                       

Product introduction

The PSS-21E0J4 CO2 gas detection sensor is a general-purpose, small sensor with good selectivity, no oxygen dependence, and long life.  It’s a high-performance sensor that combines mature infrared absorption gas detection technology with precise optical path design and sophisticated circuit design. 

Detection principle

Non dispersive infrared (NDIR). The detection principle is a method based on the gas absorption theory. When the infrared light passes through the CO2 gas to be measured, these gas molecules absorb the infrared light of a specific wavelength. By measuring the intensity of the infrared light, the concentration of CO2 gas can be analyzed quickly and accurately.

Product features

v  Detection item of intelligent sensor: CO2 gas

v  High sensitivity, high resolution and low power consumption

v  Fast response time

v  Excellent stability

v  Temperature compensation, excellent linear output

v  Provide UART output modes

v  Long service life

v  Small size

Product parameters

Parameters

Monitoring gas

Carbon dioxide

Chemical formula

CO2

Detection principle

Non dispersive infrared (NDIR)

Detection range

0~2,000ppm

Accuracy

± (50ppm ± 5% reading value)

Preheating time

1min

Response time

T90 < 120s

Interface   level

3.3V

Average current

40mA (@ 5V supply)

Peak current

150 mA (@ 5V supply)

Interface

Output signal

UART

Warranty

Warranty period

3 months (the gas sensor is a consumable, and its service life is related   to the tested environmental concentration)

Design life

10 years

Machinery                                                   

Size

32.9mm×19.7mm×18.3mm

Weight

5g

Operating temperature

-10℃~50

Operating humidity

095%RH (no condensation)

Power

Power

5V±0.1V  DC

Application

HVAC and refrigeration equipment, air quality monitoring equipment, fresh air system, air purification equipment, smart home, other consumer electronic equipment, etc.

Ordering Guide

v  PSS-21E0J4 sensor is a sensor only, it needs to use with WxS terminals to combine to different product series; On the basis of the combination, multiple PSS sensors can be loaded through the Multiple Purpose Interface (MPI) of the intelligent IoT terminal.

v  According to the specific scenario of use case, the enclosure and antenna of intelligent IoT terminal will be replaced to ensure the product quality and performance.

v  PSS sensors can be integrated with the WxS terminal via the MPI interface to form different product series.

v  Example of products are as follows:

o    WxS7800-21E0J4 WiFi Series CO2 (0-2,000ppm) Smart Sensor & RTU 2-in-1 Terminal

o    WxS8800-21E0J4 LoRaWAN Series CO2 (0-2,000ppm) Smart Sensor & RTU 2-in-1 Terminal

o    WxS9800-21E0J4 NB-IoT (China) Series CO2 (0-2,000ppm) Smart Sensor & RTU 2-in-1 Terminal

o    WxS9900-21E0J4 NB-IoT (Global) Series CO2 (0-2,000ppm) Smart Sensor & RTU 2-in-1 Terminal

o    WxSC800-21E0J4 LTE Cat1 Series CO2 (0-2,000ppm) Smart Sensor & RTU 2-in-1 Terminal

o    WxSC900-21E0J4 LTE Cat1 w/GPS Series CO2 (0-2,000ppm) Smart Sensor & RTU 2-in-1 Terminal

o    WxSD800-21E0J4 LTE Cat4 Series CO2 (0-2,000ppm) Smart Sensor & RTU 2-in-1 Terminal

o    CxS1800-21E0J4 Ethernet (RJ45) Series CO2 (0-2,000ppm) Smart Sensor & RTU 2-in-1 Terminal