Welcome !
Welcome !
关于博立信  |  联系我们
Button Text
PRODUCTS & SOLUTIONS

WxS 9800-000

Externally connected Sensor 

0.00
0.00
Quantity:
Buy now
Add to cart
  
Product Description

Externally connected Sensor 


WxS 9800-000

 Externally connected Sensor

Product Highlights

ü  Externally connected Sensor

ü  No built-in sensor

ü  External sensor connections providing analog and digital interfaces

ü  0-10v analog voltage input, 4-20mA current input, open/close, pulse counting (MPI)

ü  Support RS232/485 Modbus protocol

ü  Analog and digital outputs of executive machine control

ü  Low-power, 10AH rechargeable batteries, 18 w solar panels, maintain normal operation of outdoor.

ü  Optional DC power supply 5V~12V

ü  Edge calculation and cloud data processing and analysis

ü  Deployed in a cellular topology, Support service providers, the municipal governments and the enterprises to deploy public and private IOT networks

ü  The sensitivity of NB-IoT module is 129 dBm±1 dB, excellent penetration, the network coverage is 20dB stronger than GSM, LTE and other networks.

ü  Support the communication protocol frequency band published by the international organization agreement 3GPP.

ü  Support two kinds of configuration for data transmission. Single-tone transmission,15kHz/3.75kHz Subcarrier interval:25.2kbps(Downlink) , 15.625kbps(Uplink);Multi-tone transmission, 15kHz Subcarrier interval:25.2kbps(Downlink),54kbps(Uplink)

ü  Switch freely between Active/Idle/PSM modes, and ensure that the un-received data is retransmitted.

ü  Support IPv4/IPv6/UDP/CoAP/LwM2M/Non-IP/DTLS/TCP/MQTT protocol stack.

ü  Intelligent terminal provides multi-function interface (MPI), it can be connected with external analog and digital quantity sensors. (RS232/RS485 interface is optional.)

ü  Integrated internal antenna or optional external SMA/IPEX antenna.

ü  OTA (Over The Air) firmware upgrade, including to upgrade loader and application images

ü  Support wide voltage 5~12V DC input, 5 – 10 years of battery operational life with 2 x AA Li-SOCI2 Battery.

ü  IP67 enclosure rating.

 

Application Architecture

 

Specifications

Wireless

Sensitivity

- 129dBm±1dB

Frequency band

B1 @H-FDD: 2100MHz

B3 @H-FDD: 1800MHz

B8 @H-FDD: 900MHz

B5 @H-FDD: 850MHz

B20 @H-FDD: 800MHz

B28 @H-FDD: 700MHz

Protocol

IPv4 / IPv6 IP/UDP/CoAP/LwM2M/Non-IP/ DTLS/TCP/MQTT

Distance

NLOSNon-line-of-sight2km;

Antenna

Integrated internal antenna or external IPEX antenna (SMA)

Mechanical

Dimension

114mm x 80mm x38mm

The overall height increases with the increase of sensors.

Shell IP rating

IP67

Operating Temperature

-40to +85

Storage Temperature

-40 to +90

Total Weight

150g

Electrical

Supply Voltage

Low power consumption, 3.1V~3.66V; 1or2 Li-SOCI2 Battery; 5VDC optional.

 

Installation Guide   

Below diagram shows the general installation guide for WxS9800, it can be installed on any flat and solid surface, the lid is contacted with the surface and fixed via 2 self-tapping screws:

Below is the recommendation of the self-tapping screw and its sizes:


The Sample Application

The external connected sensor provides MPI, which can be connected with a variety of external sensors, such as displacement, vibration, tilt, crack, noise, pyroelectric infrared and so on.

        




on-line preview 



下一个: None